CFMOTO UForce 1000 100h oil ยท 100h filters ยท Free for 2 machines

CFMOTO UForce 1000 Maintenance Schedule (100h Chart)

Use this schedule as a field planning aid for the 963 cc V-Twin liquid-cooled gas engine. First 20-hour break-in oil and gear oil change, followed by 100-hour engine oil and filter intervals.

Pre-load this CFMOTO UForce 1000 into your free maintenance log Auto-loads 100h oil & 100h filter alerts, filter part-number vault, and resale binder. Free forever for 2 machines โ€” no credit card required.

CFMOTO UForce 1000 interval summary

Service itemTypical intervalField note
Engine oil100 hoursShorten for dusty, hot, idle-heavy, or severe-duty work.
Hydraulic fluid200 hoursWatch for contamination, overheating, slow functions, or leaks.
Filters100 hoursIncludes engine oil, fuel, air, hydraulic, or separator filters as equipped.
Grease pointsDaily to 50 hoursGrease A-arm bushings, sway bar fittings, and prop shaft joints every 50 hours
Tracks / tires / running gearEvery shiftCheck tire pressure, lug nuts, CV boots, and CVT air filter screen every ride

Service milestone checklist (50h / 100h / 100h / 1,000h)

DoneHour milestoneWhat to inspect & service
โ˜Daily / Every 10 hoursWalkaround fluid check (engine oil, coolant, hydraulic sight glass), grease a-arm bushings, sway bar fittings, and prop shaft joints every 50 hours, and check tire pressure, lug nuts, cv boots, and cvt air filter screen every ride
โ˜First 50 hours (Break-in)Initial break-in engine oil & filter service (and hydraulic charge/return filter where required), re-torque hardware/lugs, check belt & hose clamps.
โ˜Every 100 hoursEngine oil & oil filter change, inspect air cleaner element, drain fuel water separator, inspect battery terminals and cooling core.
โ˜Every 100 hoursPrimary fuel filter(s), engine air filters, hydraulic/hydrostatic filter service, and driveline/final-drive oil level check.
โ˜Every 200 hoursFull hydraulic fluid service (200h), suction strainer inspection, coolant flush check, and valve lash inspection.

Always verify capacities, fluids, filters, break-in service, and exact intervals against your operator's manual and warranty requirements.

Track your CFMOTO UForce 1000 intervals automatically in EquipHours

Stop tracking 100-hour oil changes and 100-hour filter services on paper. Load this CFMOTO UForce 1000 schedule into EquipHours for push + email overdue alerts, filter part-number vault, verified resale binder, and printable QR decals.

๐Ÿ”ง Repair shop or equipment dealer? Put your shop on cab stickers & earn recurring commission via Residual Apps โ†’

UTVs maintenance tips

UTVs used by crews become service trucks, sprayers, tow vehicles, and material haulers. That variety makes pre-use inspection more important than a long shop checklist. Check tire pressure, wheel nuts, CV boots, brakes, lights, and belt intake areas before the workday. Dusty properties and low-speed hauling can be harder on cooling and driveline parts than casual trail use. Record oil, filters, differential or transmission fluids, and belt inspections by hours or miles, then tighten the schedule for mud, towing, spraying, snow work, or constant stop-and-go use.

Frequently asked questions

How often should you change engine oil on a CFMOTO UForce 1000?

Typical CFMOTO UForce 1000 service calls for changing engine oil every 100 operating hours (after the initial 50-hour break-in service), or sooner in dusty, hot, or heavy-load conditions.

When are filters and fluids due on the CFMOTO UForce 1000?

Primary filter service is typically scheduled every 100 hours, with hydraulic fluid service around 200 hours. First 20-hour break-in oil and gear oil change, followed by 100-hour engine oil and filter intervals.

What is included in the 50-hour break-in service on a CFMOTO UForce 1000?

At the first 50 hours on a new or rebuilt CFMOTO UForce 1000, inspect and replace break-in engine oil and filters (Plus hydraulic return/charge filters if specified in the operator's manual), verify wheel lug or track tension torque, check belt tension, and inspect all hoses and fittings for early leaks.

What is on the daily pre-start checklist for the CFMOTO UForce 1000?

Check tire pressure, lug nuts, CV boots, and CVT air filter screen every ride. Grease A-arm bushings, sway bar fittings, and prop shaft joints every 50 hours. Log every hour-meter reading and service task in EquipHours.

How do I track CFMOTO UForce 1000 maintenance hours automatically?

You can load the CFMOTO UForce 1000 (100h oil / 100h filter intervals) directly into EquipHours for free (up to 2 machines free forever, no credit card required) to log engine hours in 10 seconds and get automatic overdue alerts.

Related utvs schedules

Track these intervals automatically with EquipHours

Set hour or mile intervals once, let crews log service in the field, and see what is coming due before a missed PM becomes downtime.