Ditch Witch SK800 250h oil ยท 250h filters ยท Free for 2 machines
Track this Ditch Witch SK800 Free โ€” Auto-Load All Service Intervals

Ditch Witch SK800 Maintenance Schedule (250h Chart)

Use this schedule as a field planning aid for the 24.8 hp Kubota D1105 diesel mini skid steer. Stand-on mini skid steer: 50-hour break-in engine oil and hydraulic filter service, then every 250 hours.

Pre-load this Ditch Witch SK800 into your free maintenance log Auto-loads 250h oil & 250h filter alerts, filter part-number vault, and resale binder. Free forever for 2 machines โ€” no credit card required.

Ditch Witch SK800 interval summary

Service itemTypical intervalField note
Engine oil250 hoursShorten for dusty, hot, idle-heavy, or severe-duty work.
Hydraulic fluid500 hoursWatch for contamination, overheating, slow functions, or leaks.
Filters250 hoursIncludes engine oil, fuel, air, hydraulic, or separator filters as equipped.
Grease pointsDaily to 50 hoursDaily loader arms, attachment plate lock pins, and track tensioner grease cylinder every 10 hours
Tracks / tires / running gearEvery shiftCheck track tension, rollers, and trencher/auger attachment hoses before every shift

Service milestone checklist (50h / 250h / 250h / 1,000h)

DoneHour milestoneWhat to inspect & service
โ˜Daily / Every 10 hoursWalkaround fluid check (engine oil, coolant, hydraulic sight glass), daily loader arms, attachment plate lock pins, and track tensioner grease cylinder every 10 hours, and check track tension, rollers, and trencher/auger attachment hoses before every shift
โ˜First 50 hours (Break-in)Initial break-in engine oil & filter service (and hydraulic charge/return filter where required), re-torque hardware/lugs, check belt & hose clamps.
โ˜Every 250 hoursEngine oil & oil filter change, inspect air cleaner element, drain fuel water separator, inspect battery terminals and cooling core.
โ˜Every 250 hoursPrimary fuel filter(s), engine air filters, hydraulic/hydrostatic filter service, and driveline/final-drive oil level check.
โ˜Every 500 hoursFull hydraulic fluid service (500h), suction strainer inspection, coolant flush check, and valve lash inspection.

Always verify capacities, fluids, filters, break-in service, and exact intervals against your operator's manual and warranty requirements.

Track your Ditch Witch SK800 intervals automatically in EquipHours

Stop tracking 250-hour oil changes and 250-hour filter services on paper. Load this Ditch Witch SK800 schedule into EquipHours for push + email overdue alerts, filter part-number vault, verified resale binder, and printable QR decals.

๐Ÿ”ง Repair shop or equipment dealer? Put your shop on cab stickers & earn recurring commission via Residual Apps โ†’

Skid Steers maintenance tips

Skid steers and compact track loaders usually fail maintenance discipline in the same places: grease points, dirty cooling packs, track tension, and skipped fluid samples. Put the daily walkaround next to the hour-meter habit. Clean debris from the belly pan and radiator screen, look for shiny pins that are running dry, and write down track or tire issues before they become a jobsite delay. Attachments matter too. A machine running a mower, breaker, planer, or trencher often needs more frequent inspection because shock load and dust accelerate wear. Treat this schedule as the starting baseline, then shorten intervals for demolition, forestry, hot weather, and dusty grading.

Frequently asked questions

How often should you change engine oil on a Ditch Witch SK800?

Typical Ditch Witch SK800 service calls for changing engine oil every 250 operating hours (after the initial 50-hour break-in service), or sooner in dusty, hot, or heavy-load conditions.

When are filters and fluids due on the Ditch Witch SK800?

Primary filter service is typically scheduled every 250 hours, with hydraulic fluid service around 500 hours. Stand-on mini skid steer: 50-hour break-in engine oil and hydraulic filter service, then every 250 hours.

What is included in the 50-hour break-in service on a Ditch Witch SK800?

At the first 50 hours on a new or rebuilt Ditch Witch SK800, inspect and replace break-in engine oil and filters (Plus hydraulic return/charge filters if specified in the operator's manual), verify wheel lug or track tension torque, check belt tension, and inspect all hoses and fittings for early leaks.

What is on the daily pre-start checklist for the Ditch Witch SK800?

Check track tension, rollers, and trencher/auger attachment hoses before every shift. Daily loader arms, attachment plate lock pins, and track tensioner grease cylinder every 10 hours. Log every hour-meter reading and service task in EquipHours.

How do I track Ditch Witch SK800 maintenance hours automatically?

You can load the Ditch Witch SK800 (250h oil / 250h filter intervals) directly into EquipHours for free (up to 2 machines free forever, no credit card required) to log engine hours in 10 seconds and get automatic overdue alerts.

Related skid steers schedules

Track these intervals automatically with EquipHours

Set hour or mile intervals once, let crews log service in the field, and see what is coming due before a missed PM becomes downtime.