Exmark Radius X-Series Maintenance Schedule (100h Chart)
Use this schedule as a field planning aid for the Kawasaki FX / Kohler EFI commercial zero-turn. First hydro transaxle fluid/filter change at 75โ100 hours, then every 500 hours.
Exmark Radius X-Series interval summary
| Service item | Typical interval | Field note |
|---|---|---|
| Engine oil | 100 hours | Shorten for dusty, hot, idle-heavy, or severe-duty work. |
| Hydraulic fluid | 500 hours | Watch for contamination, overheating, slow functions, or leaks. |
| Filters | 100 hours | Includes engine oil, fuel, air, hydraulic, or separator filters as equipped. |
| Grease points | Daily to 50 hours | Grease front caster pivots and idler arm pivots every 40 hours (sealed maintenance-free deck spindles) |
| Tracks / tires / running gear | Every shift | Check rear tire pressure (13 psi), semi-pneumatic front casters, blades, and belts before every shift |
Service milestone checklist (50h / 100h / 100h / 1,000h)
| Done | Hour milestone | What to inspect & service |
|---|---|---|
| โ | Daily / Every 10 hours | Walkaround fluid check (engine oil, coolant, hydraulic sight glass), grease front caster pivots and idler arm pivots every 40 hours (sealed maintenance-free deck spindles), and check rear tire pressure (13 psi), semi-pneumatic front casters, blades, and belts before every shift |
| โ | First 50 hours (Break-in) | Initial break-in engine oil & filter service (and hydraulic charge/return filter where required), re-torque hardware/lugs, check belt & hose clamps. |
| โ | Every 100 hours | Engine oil & oil filter change, inspect air cleaner element, drain fuel water separator, inspect battery terminals and cooling core. |
| โ | Every 100 hours | Primary fuel filter(s), engine air filters, hydraulic/hydrostatic filter service, and driveline/final-drive oil level check. |
| โ | Every 500 hours | Full hydraulic fluid service (500h), suction strainer inspection, coolant flush check, and valve lash inspection. |
Cab Service Sign-Off Log โ Exmark Radius X-Series
| Date | Engine Hours | Service Performed | Filter # / Fluid Added | Initials |
|---|---|---|---|---|
Always verify capacities, fluids, filters, break-in service, and exact intervals against your operator's manual and warranty requirements.
Stop tracking 100-hour oil changes and 100-hour filter services on paper. Load this Exmark Radius X-Series schedule into EquipHours for push + email overdue alerts, filter part-number vault, verified resale binder, and printable QR decals.
๐ง Repair shop or equipment dealer? Put your shop on cab stickers & earn recurring commission via Residual Apps โ
Commercial Mowers maintenance tips
Commercial zero-turn mowers rack up hours quickly and operate in dust, grass clippings, heat, and vibration. Daily blade, belt, tire, and deck checks prevent rough cuts and avoid small issues turning into spindle or hydro drive repairs. Oil and air filters deserve close attention during dry mowing because clogged filters shorten engine life. Keep deck buildup under control, verify blade bolt torque after blade changes, and record hydro service separately from engine oil. Crews should log service when the mower comes off the trailer, not days later when the hour reading has already changed.
Frequently asked questions
Typical Exmark Radius X-Series service calls for changing engine oil every 100 operating hours (after the initial 50-hour break-in service), or sooner in dusty, hot, or heavy-load conditions.
Primary filter service is typically scheduled every 100 hours, with hydraulic fluid service around 500 hours. First hydro transaxle fluid/filter change at 75โ100 hours, then every 500 hours.
At the first 50 hours on a new or rebuilt Exmark Radius X-Series, inspect and replace break-in engine oil and filters (Plus hydraulic return/charge filters if specified in the operator's manual), verify wheel lug or track tension torque, check belt tension, and inspect all hoses and fittings for early leaks.
Check rear tire pressure (13 psi), semi-pneumatic front casters, blades, and belts before every shift. Grease front caster pivots and idler arm pivots every 40 hours (sealed maintenance-free deck spindles). Log every hour-meter reading and service task in EquipHours.
You can load the Exmark Radius X-Series (100h oil / 100h filter intervals) directly into EquipHours for free (up to 2 machines free forever, no credit card required) to log engine hours in 10 seconds and get automatic overdue alerts.
Related commercial mowers schedules
- Exmark Staris S-Series maintenance schedule (100h oil / 100h filters)
- Toro Z Master 2000 maintenance schedule (100h oil / 100h filters)
- Toro GrandStand maintenance schedule (100h oil / 100h filters)
- Toro TurfMaster 30 maintenance schedule (50h oil / 50h filters)
- Ferris ISX 800 maintenance schedule (100h oil / 100h filters)
- Ferris ISX 2200 maintenance schedule (100h oil / 100h filters)
Track these intervals automatically with EquipHours
Set hour or mile intervals once, let crews log service in the field, and see what is coming due before a missed PM becomes downtime.