Gravely Pro-Stance 100h oil ยท 100h filters ยท Free for 2 machines

Gravely Pro-Stance Maintenance Schedule (100h Chart)

Use this schedule as a field planning aid for the Commercial V-Twin gas stand-on mower. Stand-on fleet mower: log 100h engine oil/filter and 400h hydro fluid intervals in EquipHours.

Pre-load this Gravely Pro-Stance into your free maintenance log Auto-loads 100h oil & 100h filter alerts, filter part-number vault, and resale binder. Free forever for 2 machines โ€” no credit card required.

Gravely Pro-Stance interval summary

Service itemTypical intervalField note
Engine oil100 hoursShorten for dusty, hot, idle-heavy, or severe-duty work.
Hydraulic fluid400 hoursWatch for contamination, overheating, slow functions, or leaks.
Filters100 hoursIncludes engine oil, fuel, air, hydraulic, or separator filters as equipped.
Grease pointsDaily to 50 hoursGrease caster fork pivots, wheel bearings, and deck lift linkage every 40 hours
Tracks / tires / running gearEvery shiftCheck drive tire pressure, blades, belts, and operator pad pivots daily

Service milestone checklist (50h / 100h / 100h / 1,000h)

DoneHour milestoneWhat to inspect & service
โ˜Daily / Every 10 hoursWalkaround fluid check (engine oil, coolant, hydraulic sight glass), grease caster fork pivots, wheel bearings, and deck lift linkage every 40 hours, and check drive tire pressure, blades, belts, and operator pad pivots daily
โ˜First 50 hours (Break-in)Initial break-in engine oil & filter service (and hydraulic charge/return filter where required), re-torque hardware/lugs, check belt & hose clamps.
โ˜Every 100 hoursEngine oil & oil filter change, inspect air cleaner element, drain fuel water separator, inspect battery terminals and cooling core.
โ˜Every 100 hoursPrimary fuel filter(s), engine air filters, hydraulic/hydrostatic filter service, and driveline/final-drive oil level check.
โ˜Every 400 hoursFull hydraulic fluid service (400h), suction strainer inspection, coolant flush check, and valve lash inspection.

Always verify capacities, fluids, filters, break-in service, and exact intervals against your operator's manual and warranty requirements.

Track your Gravely Pro-Stance intervals automatically in EquipHours

Stop tracking 100-hour oil changes and 100-hour filter services on paper. Load this Gravely Pro-Stance schedule into EquipHours for push + email overdue alerts, filter part-number vault, verified resale binder, and printable QR decals.

๐Ÿ”ง Repair shop or equipment dealer? Put your shop on cab stickers & earn recurring commission via Residual Apps โ†’

Commercial Mowers maintenance tips

Commercial zero-turn mowers rack up hours quickly and operate in dust, grass clippings, heat, and vibration. Daily blade, belt, tire, and deck checks prevent rough cuts and avoid small issues turning into spindle or hydro drive repairs. Oil and air filters deserve close attention during dry mowing because clogged filters shorten engine life. Keep deck buildup under control, verify blade bolt torque after blade changes, and record hydro service separately from engine oil. Crews should log service when the mower comes off the trailer, not days later when the hour reading has already changed.

Frequently asked questions

How often should you change engine oil on a Gravely Pro-Stance?

Typical Gravely Pro-Stance service calls for changing engine oil every 100 operating hours (after the initial 50-hour break-in service), or sooner in dusty, hot, or heavy-load conditions.

When are filters and fluids due on the Gravely Pro-Stance?

Primary filter service is typically scheduled every 100 hours, with hydraulic fluid service around 400 hours. Stand-on fleet mower: log 100h engine oil/filter and 400h hydro fluid intervals in EquipHours.

What is included in the 50-hour break-in service on a Gravely Pro-Stance?

At the first 50 hours on a new or rebuilt Gravely Pro-Stance, inspect and replace break-in engine oil and filters (Plus hydraulic return/charge filters if specified in the operator's manual), verify wheel lug or track tension torque, check belt tension, and inspect all hoses and fittings for early leaks.

What is on the daily pre-start checklist for the Gravely Pro-Stance?

Check drive tire pressure, blades, belts, and operator pad pivots daily. Grease caster fork pivots, wheel bearings, and deck lift linkage every 40 hours. Log every hour-meter reading and service task in EquipHours.

How do I track Gravely Pro-Stance maintenance hours automatically?

You can load the Gravely Pro-Stance (100h oil / 100h filter intervals) directly into EquipHours for free (up to 2 machines free forever, no credit card required) to log engine hours in 10 seconds and get automatic overdue alerts.

Related commercial mowers schedules

Track these intervals automatically with EquipHours

Set hour or mile intervals once, let crews log service in the field, and see what is coming due before a missed PM becomes downtime.