Kawasaki Mule PRO-FXT Maintenance Schedule (100h Chart)
Use this schedule as a field planning aid for the 812 cc 3-cylinder DOHC gas engine. Break-in oil and differential oil service at 20 hours, followed by 100-hour engine oil and filter intervals.
Kawasaki Mule PRO-FXT interval summary
| Service item | Typical interval | Field note |
|---|---|---|
| Engine oil | 100 hours | Shorten for dusty, hot, idle-heavy, or severe-duty work. |
| Hydraulic fluid | 200 hours | Watch for contamination, overheating, slow functions, or leaks. |
| Filters | 100 hours | Includes engine oil, fuel, air, hydraulic, or separator filters as equipped. |
| Grease points | Daily to 50 hours | Grease chassis, bed hinge, steering, and suspension pivots every 50 hours |
| Tracks / tires / running gear | Every shift | Check tire pressure, lug nuts, CVT belt cooling filter, and CV boots daily |
Service milestone checklist (50h / 100h / 100h / 1,000h)
| Done | Hour milestone | What to inspect & service |
|---|---|---|
| โ | Daily / Every 10 hours | Walkaround fluid check (engine oil, coolant, hydraulic sight glass), grease chassis, bed hinge, steering, and suspension pivots every 50 hours, and check tire pressure, lug nuts, cvt belt cooling filter, and cv boots daily |
| โ | First 50 hours (Break-in) | Initial break-in engine oil & filter service (and hydraulic charge/return filter where required), re-torque hardware/lugs, check belt & hose clamps. |
| โ | Every 100 hours | Engine oil & oil filter change, inspect air cleaner element, drain fuel water separator, inspect battery terminals and cooling core. |
| โ | Every 100 hours | Primary fuel filter(s), engine air filters, hydraulic/hydrostatic filter service, and driveline/final-drive oil level check. |
| โ | Every 200 hours | Full hydraulic fluid service (200h), suction strainer inspection, coolant flush check, and valve lash inspection. |
Cab Service Sign-Off Log โ Kawasaki Mule PRO-FXT
| Date | Engine Hours | Service Performed | Filter # / Fluid Added | Initials |
|---|---|---|---|---|
Always verify capacities, fluids, filters, break-in service, and exact intervals against your operator's manual and warranty requirements.
Stop tracking 100-hour oil changes and 100-hour filter services on paper. Load this Kawasaki Mule PRO-FXT schedule into EquipHours for push + email overdue alerts, filter part-number vault, verified resale binder, and printable QR decals.
๐ง Repair shop or equipment dealer? Put your shop on cab stickers & earn recurring commission via Residual Apps โ
UTVs maintenance tips
UTVs used by crews become service trucks, sprayers, tow vehicles, and material haulers. That variety makes pre-use inspection more important than a long shop checklist. Check tire pressure, wheel nuts, CV boots, brakes, lights, and belt intake areas before the workday. Dusty properties and low-speed hauling can be harder on cooling and driveline parts than casual trail use. Record oil, filters, differential or transmission fluids, and belt inspections by hours or miles, then tighten the schedule for mud, towing, spraying, snow work, or constant stop-and-go use.
Frequently asked questions
Typical Kawasaki Mule PRO-FXT service calls for changing engine oil every 100 operating hours (after the initial 50-hour break-in service), or sooner in dusty, hot, or heavy-load conditions.
Primary filter service is typically scheduled every 100 hours, with hydraulic fluid service around 200 hours. Break-in oil and differential oil service at 20 hours, followed by 100-hour engine oil and filter intervals.
At the first 50 hours on a new or rebuilt Kawasaki Mule PRO-FXT, inspect and replace break-in engine oil and filters (Plus hydraulic return/charge filters if specified in the operator's manual), verify wheel lug or track tension torque, check belt tension, and inspect all hoses and fittings for early leaks.
Check tire pressure, lug nuts, CVT belt cooling filter, and CV boots daily. Grease chassis, bed hinge, steering, and suspension pivots every 50 hours. Log every hour-meter reading and service task in EquipHours.
You can load the Kawasaki Mule PRO-FXT (100h oil / 100h filter intervals) directly into EquipHours for free (up to 2 machines free forever, no credit card required) to log engine hours in 10 seconds and get automatic overdue alerts.
Related utvs schedules
- Kawasaki Mule SX maintenance schedule (100h oil / 100h filters)
- Honda Pioneer 700 maintenance schedule (100h oil / 100h filters)
- Honda Pioneer 520 maintenance schedule (100h oil / 100h filters)
- John Deere Gator XUV590M maintenance schedule (100h oil / 100h filters)
- John Deere Gator HPX615E maintenance schedule (100h oil / 100h filters)
- Kubota RTV-X900 maintenance schedule (200h oil / 200h filters)
Track these intervals automatically with EquipHours
Set hour or mile intervals once, let crews log service in the field, and see what is coming due before a missed PM becomes downtime.