New Holland Workmaster 25S 150h oil ยท 150h filters ยท Free for 2 machines

New Holland Workmaster 25S Maintenance Schedule (150h Chart)

Use this schedule as a field planning aid for the 24.7 hp 3-cylinder diesel sub-compact tractor. First 50-hour break-in engine oil and HST/hydraulic filter change, then every 150โ€“200 hours.

Pre-load this New Holland Workmaster 25S into your free maintenance log Auto-loads 150h oil & 150h filter alerts, filter part-number vault, and resale binder. Free forever for 2 machines โ€” no credit card required.

New Holland Workmaster 25S interval summary

Service itemTypical intervalField note
Engine oil150 hoursShorten for dusty, hot, idle-heavy, or severe-duty work.
Hydraulic fluid300 hoursWatch for contamination, overheating, slow functions, or leaks.
Filters150 hoursIncludes engine oil, fuel, air, hydraulic, or separator filters as equipped.
Grease pointsDaily to 50 hoursGrease 100LC loader, backhoe, mid-mount mower deck, and front axle pivots every 10 hours
Tracks / tires / running gearEvery shiftCheck tire pressure, wheel lugs, and HST cooling fan before mowing or loader use

Service milestone checklist (50h / 150h / 150h / 1,000h)

DoneHour milestoneWhat to inspect & service
โ˜Daily / Every 10 hoursWalkaround fluid check (engine oil, coolant, hydraulic sight glass), grease 100lc loader, backhoe, mid-mount mower deck, and front axle pivots every 10 hours, and check tire pressure, wheel lugs, and hst cooling fan before mowing or loader use
โ˜First 50 hours (Break-in)Initial break-in engine oil & filter service (and hydraulic charge/return filter where required), re-torque hardware/lugs, check belt & hose clamps.
โ˜Every 150 hoursEngine oil & oil filter change, inspect air cleaner element, drain fuel water separator, inspect battery terminals and cooling core.
โ˜Every 150 hoursPrimary fuel filter(s), engine air filters, hydraulic/hydrostatic filter service, and driveline/final-drive oil level check.
โ˜Every 300 hoursFull hydraulic fluid service (300h), suction strainer inspection, coolant flush check, and valve lash inspection.

Always verify capacities, fluids, filters, break-in service, and exact intervals against your operator's manual and warranty requirements.

Track your New Holland Workmaster 25S intervals automatically in EquipHours

Stop tracking 150-hour oil changes and 150-hour filter services on paper. Load this New Holland Workmaster 25S schedule into EquipHours for push + email overdue alerts, filter part-number vault, verified resale binder, and printable QR decals.

๐Ÿ”ง Repair shop or equipment dealer? Put your shop on cab stickers & earn recurring commission via Residual Apps โ†’

Compact Tractors maintenance tips

Compact tractors often do mixed work: loader work in the morning, mowing in the afternoon, and grading or snow work later in the season. That makes meter-based service more reliable than calendar memory. Grease loader pins frequently, check front axle oil where applicable, and keep radiator screens clean when mowing or brush work throws chaff into the grille. Tire pressure matters because ballast, loader loads, and slopes change handling quickly. Track engine oil, hydraulic filters, fuel filters, and mower deck or backhoe fittings as separate items so one attachment does not hide another service need.

Frequently asked questions

How often should you change engine oil on a New Holland Workmaster 25S?

Typical New Holland Workmaster 25S service calls for changing engine oil every 150 operating hours (after the initial 50-hour break-in service), or sooner in dusty, hot, or heavy-load conditions.

When are filters and fluids due on the New Holland Workmaster 25S?

Primary filter service is typically scheduled every 150 hours, with hydraulic fluid service around 300 hours. First 50-hour break-in engine oil and HST/hydraulic filter change, then every 150โ€“200 hours.

What is included in the 50-hour break-in service on a New Holland Workmaster 25S?

At the first 50 hours on a new or rebuilt New Holland Workmaster 25S, inspect and replace break-in engine oil and filters (Plus hydraulic return/charge filters if specified in the operator's manual), verify wheel lug or track tension torque, check belt tension, and inspect all hoses and fittings for early leaks.

What is on the daily pre-start checklist for the New Holland Workmaster 25S?

Check tire pressure, wheel lugs, and HST cooling fan before mowing or loader use. Grease 100LC loader, backhoe, mid-mount mower deck, and front axle pivots every 10 hours. Log every hour-meter reading and service task in EquipHours.

How do I track New Holland Workmaster 25S maintenance hours automatically?

You can load the New Holland Workmaster 25S (150h oil / 150h filter intervals) directly into EquipHours for free (up to 2 machines free forever, no credit card required) to log engine hours in 10 seconds and get automatic overdue alerts.

Related compact tractors schedules

Track these intervals automatically with EquipHours

Set hour or mile intervals once, let crews log service in the field, and see what is coming due before a missed PM becomes downtime.