Generac 18 kW Guardian (7228) Schedule A & B + Weekly Exercise ยท Free for 2 machines

Generac 18 kW Guardian Standby Maintenance

816 cc G-Force air-cooled home standby generator โ€” Schedule A every 6 months or 200 hours, weekly exercise, annual Schedule B check. Always perform the initial 25-hour break-in oil change and valve lash check after extended storm runtime.

Fuel: Natural gas or LP

Pre-load Generac 18 kW Guardian (7228) Schedule A & B reminders Get calendar + hour alerts for weekly exercise, 6-month oil service, and annual inspection. Free forever for 2 machines.

Weekly exercise

Weekly: 5-to-20 minute automatic exercise cycle; verify green ready LED after run

Schedule A โ€” owner service

Interval: Every 6 months or 200 hours

DoneTaskNotes
โ˜Change engine oil (5W-30 synthetic) and spin-on oil filterLog date and hour meter in EquipHours after completion.
โ˜Inspect or replace air filter elementLog date and hour meter in EquipHours after completion.
โ˜Inspect spark plugs and set gap per manualLog date and hour meter in EquipHours after completion.
โ˜Check 12V battery state of charge and clean terminalsLog date and hour meter in EquipHours after completion.
โ˜Inspect enclosure louvers for leaves, snow, or waspsLog date and hour meter in EquipHours after completion.

Schedule B โ€” annual service

Interval: Annually or every 400 hours

DoneTaskNotes
โ˜Complete all Schedule A itemsKeep receipts and dealer invoices with your maintenance log.
โ˜Replace spark plugs and air filterKeep receipts and dealer invoices with your maintenance log.
โ˜Check valve clearance (mandatory after first 25 hours, then every 400 hours)Keep receipts and dealer invoices with your maintenance log.
โ˜Perform simulated utility power outage transfer switch testKeep receipts and dealer invoices with your maintenance log.

Always verify fluids, torques, and intervals in your model-specific operator manual. This page is a planning aid, not a substitute for manufacturer instructions or qualified service.

Automate Generac 18 kW Guardian (7228) Schedule A & B reminders in EquipHours

Load this Generac 18 kW Guardian (7228) standby generator template in one tap: weekly exercise reminders, Schedule A oil/filter alerts, and Schedule B annual service tracking with push + email notifications.

๐Ÿ”ง Generator tech, electrician, or dealer? Put your shop on enclosure QR stickers & earn recurring commission via Residual Apps โ†’

Frequently asked questions

How often does the Generac 18 kW Guardian (7228) require Schedule A maintenance?

Schedule A owner service for the Generac 18 kW Guardian (7228) is due every 6 months or 200 hours. Key tasks include: Change engine oil (5W-30 synthetic) and spin-on oil filter; Inspect or replace air filter element; Inspect spark plugs and set gap per manual.

What is included in Generac 18 kW Guardian (7228) Schedule B annual service?

Schedule B is performed annually or every 400 hours and covers: Complete all Schedule A items; Replace spark plugs and air filter; Check valve clearance (mandatory after first 25 hours, then every 400 hours).

How often should the Generac 18 kW Guardian (7228) exercise?

Weekly: 5-to-20 minute automatic exercise cycle; verify green ready LED after run Log every exercise run, Schedule A oil service, and battery check in EquipHours.

EquipHours vs. Generac Mobile Link

Generac Mobile Link monitors connected units remotely and reports faults from the controller. It does not replace a maintenance log โ€” it will not tell you when you last changed oil, which spark plugs went in, or whether Schedule B happened on time if you did the work yourself.

EquipHours works with any brand (Generac, Kohler, Cummins, Briggs) and does not require a cellular module. Log exercise cycles, Schedule A, dealer visits, battery replacements, and photos in one place. Free for two machines.

Related standby generator schedules

Track Schedule A and B in EquipHours

Set calendar reminders for exercise, oil, and annual service. Log what you did, attach photos, and export history for your dealer โ€” free for two machines.