Yanmar ViO35-6A 250h oil ยท 250h filters ยท Free for 2 machines
Track this Yanmar ViO35-6A Free โ€” Auto-Load All Service Intervals

Yanmar ViO35-6A Maintenance Schedule (250h Chart)

Use this schedule as a field planning aid for the 24.4 hp Yanmar 3TNV88F-ESBV diesel. Initial 50-hour break-in engine oil, hydraulic return filter, and travel motor oil change required.

Pre-load this Yanmar ViO35-6A into your free maintenance log Auto-loads 250h oil & 250h filter alerts, filter part-number vault, and resale binder. Free forever for 2 machines โ€” no credit card required.

Yanmar ViO35-6A interval summary

Service itemTypical intervalField note
Engine oil250 hoursShorten for dusty, hot, idle-heavy, or severe-duty work.
Hydraulic fluid1000 hoursWatch for contamination, overheating, slow functions, or leaks.
Filters250 hoursIncludes engine oil, fuel, air, hydraulic, or separator filters as equipped.
Grease pointsDaily to 50 hoursDaily bucket, quick coupler, thumb, arm, boom, and blade pins every 10 hours
Tracks / tires / running gearEvery shiftCheck zero-tail-swing rubber track sag, rollers, and travel reduction gear oil every 250 hours

Service milestone checklist (50h / 250h / 250h / 1,000h)

DoneHour milestoneWhat to inspect & service
โ˜Daily / Every 10 hoursWalkaround fluid check (engine oil, coolant, hydraulic sight glass), daily bucket, quick coupler, thumb, arm, boom, and blade pins every 10 hours, and check zero-tail-swing rubber track sag, rollers, and travel reduction gear oil every 250 hours
โ˜First 50 hours (Break-in)Initial break-in engine oil & filter service (and hydraulic charge/return filter where required), re-torque hardware/lugs, check belt & hose clamps.
โ˜Every 250 hoursEngine oil & oil filter change, inspect air cleaner element, drain fuel water separator, inspect battery terminals and cooling core.
โ˜Every 250 hoursPrimary fuel filter(s), engine air filters, hydraulic/hydrostatic filter service, and driveline/final-drive oil level check.
โ˜Every 1000 hoursFull hydraulic fluid service (1000h), suction strainer inspection, coolant flush check, and valve lash inspection.

Always verify capacities, fluids, filters, break-in service, and exact intervals against your operator's manual and warranty requirements.

Track your Yanmar ViO35-6A intervals automatically in EquipHours

Stop tracking 250-hour oil changes and 250-hour filter services on paper. Load this Yanmar ViO35-6A schedule into EquipHours for push + email overdue alerts, filter part-number vault, verified resale binder, and printable QR decals.

๐Ÿ”ง Repair shop or equipment dealer? Put your shop on cab stickers & earn recurring commission via Residual Apps โ†’

Mini Excavators maintenance tips

Mini excavators live on pins, bushings, hydraulic oil, and clean undercarriages. The easiest preventive win is daily greasing with the bucket, arm, boom, blade, and swing points visible before the operator starts trenching. Track tension should be checked on level ground and cleaned after muddy work so packed material does not over-tighten the rubber track. Watch for weeping cylinder seals, loose bucket hardware, and damaged coupler locks. If the excavator runs a hammer, auger, or thumb most days, inspect auxiliary lines and fittings more often than the standard schedule suggests.

Frequently asked questions

How often should you change engine oil on a Yanmar ViO35-6A?

Typical Yanmar ViO35-6A service calls for changing engine oil every 250 operating hours (after the initial 50-hour break-in service), or sooner in dusty, hot, or heavy-load conditions.

When are filters and fluids due on the Yanmar ViO35-6A?

Primary filter service is typically scheduled every 250 hours, with hydraulic fluid service around 1000 hours. Initial 50-hour break-in engine oil, hydraulic return filter, and travel motor oil change required.

What is included in the 50-hour break-in service on a Yanmar ViO35-6A?

At the first 50 hours on a new or rebuilt Yanmar ViO35-6A, inspect and replace break-in engine oil and filters (Plus hydraulic return/charge filters if specified in the operator's manual), verify wheel lug or track tension torque, check belt tension, and inspect all hoses and fittings for early leaks.

What is on the daily pre-start checklist for the Yanmar ViO35-6A?

Check zero-tail-swing rubber track sag, rollers, and travel reduction gear oil every 250 hours. Daily bucket, quick coupler, thumb, arm, boom, and blade pins every 10 hours. Log every hour-meter reading and service task in EquipHours.

How do I track Yanmar ViO35-6A maintenance hours automatically?

You can load the Yanmar ViO35-6A (250h oil / 250h filter intervals) directly into EquipHours for free (up to 2 machines free forever, no credit card required) to log engine hours in 10 seconds and get automatic overdue alerts.

Related mini excavators schedules

Track these intervals automatically with EquipHours

Set hour or mile intervals once, let crews log service in the field, and see what is coming due before a missed PM becomes downtime.