Bobcat E26 Maintenance Schedule (250h Chart)
Use this schedule as a field planning aid for the 24.8 hp Kubota D1105 diesel. No-DPF 25-hp class excavator: engine oil and filter every 250 hours; travel motor oil at 50h then every 500h.
Bobcat E26 interval summary
| Service item | Typical interval | Field note |
|---|---|---|
| Engine oil | 250 hours | Shorten for dusty, hot, idle-heavy, or severe-duty work. |
| Hydraulic fluid | 1000 hours | Watch for contamination, overheating, slow functions, or leaks. |
| Filters | 250 hours | Includes engine oil, fuel, air, hydraulic, or separator filters as equipped. |
| Grease points | Daily to 50 hours | Daily boom, arm, bucket linkage, clamp thumb, blade, and swing post pins every 10 hours |
| Tracks / tires / running gear | Every shift | Check rubber track sag, rollers, idlers, and final drive travel motor oil every 250 hours |
Service milestone checklist (50h / 250h / 250h / 1,000h)
| Done | Hour milestone | What to inspect & service |
|---|---|---|
| โ | Daily / Every 10 hours | Walkaround fluid check (engine oil, coolant, hydraulic sight glass), daily boom, arm, bucket linkage, clamp thumb, blade, and swing post pins every 10 hours, and check rubber track sag, rollers, idlers, and final drive travel motor oil every 250 hours |
| โ | First 50 hours (Break-in) | Initial break-in engine oil & filter service (and hydraulic charge/return filter where required), re-torque hardware/lugs, check belt & hose clamps. |
| โ | Every 250 hours | Engine oil & oil filter change, inspect air cleaner element, drain fuel water separator, inspect battery terminals and cooling core. |
| โ | Every 250 hours | Primary fuel filter(s), engine air filters, hydraulic/hydrostatic filter service, and driveline/final-drive oil level check. |
| โ | Every 1000 hours | Full hydraulic fluid service (1000h), suction strainer inspection, coolant flush check, and valve lash inspection. |
Cab Service Sign-Off Log โ Bobcat E26
| Date | Engine Hours | Service Performed | Filter # / Fluid Added | Initials |
|---|---|---|---|---|
Always verify capacities, fluids, filters, break-in service, and exact intervals against your operator's manual and warranty requirements.
Stop tracking 250-hour oil changes and 250-hour filter services on paper. Load this Bobcat E26 schedule into EquipHours for push + email overdue alerts, filter part-number vault, verified resale binder, and printable QR decals.
๐ง Repair shop or equipment dealer? Put your shop on cab stickers & earn recurring commission via Residual Apps โ
Mini Excavators maintenance tips
Mini excavators live on pins, bushings, hydraulic oil, and clean undercarriages. The easiest preventive win is daily greasing with the bucket, arm, boom, blade, and swing points visible before the operator starts trenching. Track tension should be checked on level ground and cleaned after muddy work so packed material does not over-tighten the rubber track. Watch for weeping cylinder seals, loose bucket hardware, and damaged coupler locks. If the excavator runs a hammer, auger, or thumb most days, inspect auxiliary lines and fittings more often than the standard schedule suggests.
Frequently asked questions
Typical Bobcat E26 service calls for changing engine oil every 250 operating hours (after the initial 50-hour break-in service), or sooner in dusty, hot, or heavy-load conditions.
Primary filter service is typically scheduled every 250 hours, with hydraulic fluid service around 1000 hours. No-DPF 25-hp class excavator: engine oil and filter every 250 hours; travel motor oil at 50h then every 500h.
At the first 50 hours on a new or rebuilt Bobcat E26, inspect and replace break-in engine oil and filters (Plus hydraulic return/charge filters if specified in the operator's manual), verify wheel lug or track tension torque, check belt tension, and inspect all hoses and fittings for early leaks.
Check rubber track sag, rollers, idlers, and final drive travel motor oil every 250 hours. Daily boom, arm, bucket linkage, clamp thumb, blade, and swing post pins every 10 hours. Log every hour-meter reading and service task in EquipHours.
You can load the Bobcat E26 (250h oil / 250h filter intervals) directly into EquipHours for free (up to 2 machines free forever, no credit card required) to log engine hours in 10 seconds and get automatic overdue alerts.
Related mini excavators schedules
- Bobcat E42 maintenance schedule (500h oil / 500h filters)
- Bobcat E50 maintenance schedule (500h oil / 500h filters)
- Bobcat E88 maintenance schedule (500h oil / 500h filters)
- Cat 303.5 CR maintenance schedule (500h oil / 500h filters)
- Cat 308 CR maintenance schedule (500h oil / 500h filters)
- Kubota KX033-4 maintenance schedule (500h oil / 500h filters)
Track these intervals automatically with EquipHours
Set hour or mile intervals once, let crews log service in the field, and see what is coming due before a missed PM becomes downtime.