Kubota KX033-4 500h oil ยท 500h filters ยท Free for 2 machines
Track this Kubota KX033-4 Free โ€” Auto-Load All Service Intervals

Kubota KX033-4 Maintenance Schedule (500h Chart)

Use this schedule as a field planning aid for the 24.8 hp Kubota D1703-M-DI diesel. Change travel motor gear oil at first 50 hours and every 500 hours thereafter.

Pre-load this Kubota KX033-4 into your free maintenance log Auto-loads 500h oil & 500h filter alerts, filter part-number vault, and resale binder. Free forever for 2 machines โ€” no credit card required.

Kubota KX033-4 interval summary

Service itemTypical intervalField note
Engine oil500 hoursShorten for dusty, hot, idle-heavy, or severe-duty work.
Hydraulic fluid1000 hoursWatch for contamination, overheating, slow functions, or leaks.
Filters500 hoursIncludes engine oil, fuel, air, hydraulic, or separator filters as equipped.
Grease pointsDaily to 50 hoursDaily bucket/thumb pins (10h), boom/arm/blade pins (50h), and swing bearing teeth (50h)
Tracks / tires / running gearEvery shiftCheck rubber track sag, rollers, and drain water separator before every shift

Service milestone checklist (50h / 500h / 500h / 1,000h)

DoneHour milestoneWhat to inspect & service
โ˜Daily / Every 10 hoursWalkaround fluid check (engine oil, coolant, hydraulic sight glass), daily bucket/thumb pins (10h), boom/arm/blade pins (50h), and swing bearing teeth (50h), and check rubber track sag, rollers, and drain water separator before every shift
โ˜First 50 hours (Break-in)Initial break-in engine oil & filter service (and hydraulic charge/return filter where required), re-torque hardware/lugs, check belt & hose clamps.
โ˜Every 500 hoursEngine oil & oil filter change, inspect air cleaner element, drain fuel water separator, inspect battery terminals and cooling core.
โ˜Every 500 hoursPrimary fuel filter(s), engine air filters, hydraulic/hydrostatic filter service, and driveline/final-drive oil level check.
โ˜Every 1000 hoursFull hydraulic fluid service (1000h), suction strainer inspection, coolant flush check, and valve lash inspection.

Always verify capacities, fluids, filters, break-in service, and exact intervals against your operator's manual and warranty requirements.

Track your Kubota KX033-4 intervals automatically in EquipHours

Stop tracking 500-hour oil changes and 500-hour filter services on paper. Load this Kubota KX033-4 schedule into EquipHours for push + email overdue alerts, filter part-number vault, verified resale binder, and printable QR decals.

๐Ÿ”ง Repair shop or equipment dealer? Put your shop on cab stickers & earn recurring commission via Residual Apps โ†’

Mini Excavators maintenance tips

Mini excavators live on pins, bushings, hydraulic oil, and clean undercarriages. The easiest preventive win is daily greasing with the bucket, arm, boom, blade, and swing points visible before the operator starts trenching. Track tension should be checked on level ground and cleaned after muddy work so packed material does not over-tighten the rubber track. Watch for weeping cylinder seals, loose bucket hardware, and damaged coupler locks. If the excavator runs a hammer, auger, or thumb most days, inspect auxiliary lines and fittings more often than the standard schedule suggests.

Frequently asked questions

How often should you change engine oil on a Kubota KX033-4?

Typical Kubota KX033-4 service calls for changing engine oil every 500 operating hours (after the initial 50-hour break-in service), or sooner in dusty, hot, or heavy-load conditions.

When are filters and fluids due on the Kubota KX033-4?

Primary filter service is typically scheduled every 500 hours, with hydraulic fluid service around 1000 hours. Change travel motor gear oil at first 50 hours and every 500 hours thereafter.

What is included in the 50-hour break-in service on a Kubota KX033-4?

At the first 50 hours on a new or rebuilt Kubota KX033-4, inspect and replace break-in engine oil and filters (Plus hydraulic return/charge filters if specified in the operator's manual), verify wheel lug or track tension torque, check belt tension, and inspect all hoses and fittings for early leaks.

What is on the daily pre-start checklist for the Kubota KX033-4?

Check rubber track sag, rollers, and drain water separator before every shift. Daily bucket/thumb pins (10h), boom/arm/blade pins (50h), and swing bearing teeth (50h). Log every hour-meter reading and service task in EquipHours.

How do I track Kubota KX033-4 maintenance hours automatically?

You can load the Kubota KX033-4 (500h oil / 500h filter intervals) directly into EquipHours for free (up to 2 machines free forever, no credit card required) to log engine hours in 10 seconds and get automatic overdue alerts.

Related mini excavators schedules

Track these intervals automatically with EquipHours

Set hour or mile intervals once, let crews log service in the field, and see what is coming due before a missed PM becomes downtime.