Bobcat MT100 250h oil ยท 250h filters ยท Free for 2 machines
Track this Bobcat MT100 Free โ€” Auto-Load All Service Intervals

Bobcat MT100 Maintenance Schedule (250h Chart)

Use this schedule as a field planning aid for the 25 hp Kubota D902 diesel mini track loader. Stand-on mini track loader: 50-hour initial filter service, then 250-hour engine oil and filter intervals.

Pre-load this Bobcat MT100 into your free maintenance log Auto-loads 250h oil & 250h filter alerts, filter part-number vault, and resale binder. Free forever for 2 machines โ€” no credit card required.

Bobcat MT100 interval summary

Service itemTypical intervalField note
Engine oil250 hoursShorten for dusty, hot, idle-heavy, or severe-duty work.
Hydraulic fluid500 hoursWatch for contamination, overheating, slow functions, or leaks.
Filters250 hoursIncludes engine oil, fuel, air, hydraulic, or separator filters as equipped.
Grease pointsDaily to 50 hoursGrease loader arms, tilt cylinder, CII/Bob-Tach interface, and undercarriage pivots every 10 hours
Tracks / tires / running gearEvery shiftCheck narrow rubber track tension, rollers, and sprockets every shift

Service milestone checklist (50h / 250h / 250h / 1,000h)

DoneHour milestoneWhat to inspect & service
โ˜Daily / Every 10 hoursWalkaround fluid check (engine oil, coolant, hydraulic sight glass), grease loader arms, tilt cylinder, cii/bob-tach interface, and undercarriage pivots every 10 hours, and check narrow rubber track tension, rollers, and sprockets every shift
โ˜First 50 hours (Break-in)Initial break-in engine oil & filter service (and hydraulic charge/return filter where required), re-torque hardware/lugs, check belt & hose clamps.
โ˜Every 250 hoursEngine oil & oil filter change, inspect air cleaner element, drain fuel water separator, inspect battery terminals and cooling core.
โ˜Every 250 hoursPrimary fuel filter(s), engine air filters, hydraulic/hydrostatic filter service, and driveline/final-drive oil level check.
โ˜Every 500 hoursFull hydraulic fluid service (500h), suction strainer inspection, coolant flush check, and valve lash inspection.

Always verify capacities, fluids, filters, break-in service, and exact intervals against your operator's manual and warranty requirements.

Track your Bobcat MT100 intervals automatically in EquipHours

Stop tracking 250-hour oil changes and 250-hour filter services on paper. Load this Bobcat MT100 schedule into EquipHours for push + email overdue alerts, filter part-number vault, verified resale binder, and printable QR decals.

๐Ÿ”ง Repair shop or equipment dealer? Put your shop on cab stickers & earn recurring commission via Residual Apps โ†’

Skid Steers maintenance tips

Skid steers and compact track loaders usually fail maintenance discipline in the same places: grease points, dirty cooling packs, track tension, and skipped fluid samples. Put the daily walkaround next to the hour-meter habit. Clean debris from the belly pan and radiator screen, look for shiny pins that are running dry, and write down track or tire issues before they become a jobsite delay. Attachments matter too. A machine running a mower, breaker, planer, or trencher often needs more frequent inspection because shock load and dust accelerate wear. Treat this schedule as the starting baseline, then shorten intervals for demolition, forestry, hot weather, and dusty grading.

Frequently asked questions

How often should you change engine oil on a Bobcat MT100?

Typical Bobcat MT100 service calls for changing engine oil every 250 operating hours (after the initial 50-hour break-in service), or sooner in dusty, hot, or heavy-load conditions.

When are filters and fluids due on the Bobcat MT100?

Primary filter service is typically scheduled every 250 hours, with hydraulic fluid service around 500 hours. Stand-on mini track loader: 50-hour initial filter service, then 250-hour engine oil and filter intervals.

What is included in the 50-hour break-in service on a Bobcat MT100?

At the first 50 hours on a new or rebuilt Bobcat MT100, inspect and replace break-in engine oil and filters (Plus hydraulic return/charge filters if specified in the operator's manual), verify wheel lug or track tension torque, check belt tension, and inspect all hoses and fittings for early leaks.

What is on the daily pre-start checklist for the Bobcat MT100?

Check narrow rubber track tension, rollers, and sprockets every shift. Grease loader arms, tilt cylinder, CII/Bob-Tach interface, and undercarriage pivots every 10 hours. Log every hour-meter reading and service task in EquipHours.

How do I track Bobcat MT100 maintenance hours automatically?

You can load the Bobcat MT100 (250h oil / 250h filter intervals) directly into EquipHours for free (up to 2 machines free forever, no credit card required) to log engine hours in 10 seconds and get automatic overdue alerts.

Related skid steers schedules

Track these intervals automatically with EquipHours

Set hour or mile intervals once, let crews log service in the field, and see what is coming due before a missed PM becomes downtime.