John Deere 325G Maintenance Schedule (500h Chart)
Use this schedule as a field planning aid for the 74 hp Yanmar 4TNV98CT turbo diesel. Use Plus-50 II oil and Hydrau fluid for full 500h/1000h Deere intervals; shorten by 50% with standard fluids.
John Deere 325G interval summary
| Service item | Typical interval | Field note |
|---|---|---|
| Engine oil | 500 hours | Shorten for dusty, hot, idle-heavy, or severe-duty work. |
| Hydraulic fluid | 1000 hours | Watch for contamination, overheating, slow functions, or leaks. |
| Filters | 500 hours | Includes engine oil, fuel, air, hydraulic, or separator filters as equipped. |
| Grease points | Daily to 50 hours | Daily vertical-lift boom pins, Quik-Tach latches, and cylinder pivots every 10 hours |
| Tracks / tires / running gear | Every shift | Inspect track tension, idlers, rollers, and planetary final drive oil every 250 hours |
Service milestone checklist (50h / 500h / 500h / 1,000h)
| Done | Hour milestone | What to inspect & service |
|---|---|---|
| โ | Daily / Every 10 hours | Walkaround fluid check (engine oil, coolant, hydraulic sight glass), daily vertical-lift boom pins, quik-tach latches, and cylinder pivots every 10 hours, and inspect track tension, idlers, rollers, and planetary final drive oil every 250 hours |
| โ | First 50 hours (Break-in) | Initial break-in engine oil & filter service (and hydraulic charge/return filter where required), re-torque hardware/lugs, check belt & hose clamps. |
| โ | Every 500 hours | Engine oil & oil filter change, inspect air cleaner element, drain fuel water separator, inspect battery terminals and cooling core. |
| โ | Every 500 hours | Primary fuel filter(s), engine air filters, hydraulic/hydrostatic filter service, and driveline/final-drive oil level check. |
| โ | Every 1000 hours | Full hydraulic fluid service (1000h), suction strainer inspection, coolant flush check, and valve lash inspection. |
Cab Service Sign-Off Log โ John Deere 325G
| Date | Engine Hours | Service Performed | Filter # / Fluid Added | Initials |
|---|---|---|---|---|
Always verify capacities, fluids, filters, break-in service, and exact intervals against your operator's manual and warranty requirements.
Stop tracking 500-hour oil changes and 500-hour filter services on paper. Load this John Deere 325G schedule into EquipHours for push + email overdue alerts, filter part-number vault, verified resale binder, and printable QR decals.
๐ง Repair shop or equipment dealer? Put your shop on cab stickers & earn recurring commission via Residual Apps โ
Skid Steers maintenance tips
Skid steers and compact track loaders usually fail maintenance discipline in the same places: grease points, dirty cooling packs, track tension, and skipped fluid samples. Put the daily walkaround next to the hour-meter habit. Clean debris from the belly pan and radiator screen, look for shiny pins that are running dry, and write down track or tire issues before they become a jobsite delay. Attachments matter too. A machine running a mower, breaker, planer, or trencher often needs more frequent inspection because shock load and dust accelerate wear. Treat this schedule as the starting baseline, then shorten intervals for demolition, forestry, hot weather, and dusty grading.
Frequently asked questions
Typical John Deere 325G service calls for changing engine oil every 500 operating hours (after the initial 50-hour break-in service), or sooner in dusty, hot, or heavy-load conditions.
Primary filter service is typically scheduled every 500 hours, with hydraulic fluid service around 1000 hours. Use Plus-50 II oil and Hydrau fluid for full 500h/1000h Deere intervals; shorten by 50% with standard fluids.
At the first 50 hours on a new or rebuilt John Deere 325G, inspect and replace break-in engine oil and filters (Plus hydraulic return/charge filters if specified in the operator's manual), verify wheel lug or track tension torque, check belt tension, and inspect all hoses and fittings for early leaks.
Inspect track tension, idlers, rollers, and planetary final drive oil every 250 hours. Daily vertical-lift boom pins, Quik-Tach latches, and cylinder pivots every 10 hours. Log every hour-meter reading and service task in EquipHours.
You can load the John Deere 325G (500h oil / 500h filter intervals) directly into EquipHours for free (up to 2 machines free forever, no credit card required) to log engine hours in 10 seconds and get automatic overdue alerts.
Related skid steers schedules
- John Deere 331G maintenance schedule (500h oil / 500h filters)
- Takeuchi TL8R2 maintenance schedule (500h oil / 500h filters)
- Takeuchi TL10V2 maintenance schedule (500h oil / 500h filters)
- Ditch Witch SK800 maintenance schedule (250h oil / 250h filters)
- Vermeer CTX100 maintenance schedule (250h oil / 250h filters)
- Bobcat T76 maintenance schedule (500h oil / 500h filters)
Track these intervals automatically with EquipHours
Set hour or mile intervals once, let crews log service in the field, and see what is coming due before a missed PM becomes downtime.