Bobcat T86 500h oil ยท 500h filters ยท Free for 2 machines
Track this Bobcat T86 Free โ€” Auto-Load All Service Intervals

Bobcat T86 Maintenance Schedule (500h Chart)

Use this schedule as a field planning aid for the 105 hp Bobcat 3.4L diesel. Super-flow/forestry applications should shorten hydraulic filter and planetary drive oil checks to 250 hours.

Pre-load this Bobcat T86 into your free maintenance log Auto-loads 500h oil & 500h filter alerts, filter part-number vault, and resale binder. Free forever for 2 machines โ€” no credit card required.

Bobcat T86 interval summary

Service itemTypical intervalField note
Engine oil500 hoursShorten for dusty, hot, idle-heavy, or severe-duty work.
Hydraulic fluid1000 hoursWatch for contamination, overheating, slow functions, or leaks.
Filters500 hoursIncludes engine oil, fuel, air, hydraulic, or separator filters as equipped.
Grease pointsDaily to 50 hoursGrease loader linkage, 5-link torsion suspension (if equipped), and Bob-Tach pins every 10 hours
Tracks / tires / running gearEvery shiftInspect tracks, rollers, idlers, and super-flow auxiliary quick couplers before every shift

Service milestone checklist (50h / 500h / 500h / 1,000h)

DoneHour milestoneWhat to inspect & service
โ˜Daily / Every 10 hoursWalkaround fluid check (engine oil, coolant, hydraulic sight glass), grease loader linkage, 5-link torsion suspension (if equipped), and bob-tach pins every 10 hours, and inspect tracks, rollers, idlers, and super-flow auxiliary quick couplers before every shift
โ˜First 50 hours (Break-in)Initial break-in engine oil & filter service (and hydraulic charge/return filter where required), re-torque hardware/lugs, check belt & hose clamps.
โ˜Every 500 hoursEngine oil & oil filter change, inspect air cleaner element, drain fuel water separator, inspect battery terminals and cooling core.
โ˜Every 500 hoursPrimary fuel filter(s), engine air filters, hydraulic/hydrostatic filter service, and driveline/final-drive oil level check.
โ˜Every 1000 hoursFull hydraulic fluid service (1000h), suction strainer inspection, coolant flush check, and valve lash inspection.

Always verify capacities, fluids, filters, break-in service, and exact intervals against your operator's manual and warranty requirements.

Track your Bobcat T86 intervals automatically in EquipHours

Stop tracking 500-hour oil changes and 500-hour filter services on paper. Load this Bobcat T86 schedule into EquipHours for push + email overdue alerts, filter part-number vault, verified resale binder, and printable QR decals.

๐Ÿ”ง Repair shop or equipment dealer? Put your shop on cab stickers & earn recurring commission via Residual Apps โ†’

Skid Steers maintenance tips

Skid steers and compact track loaders usually fail maintenance discipline in the same places: grease points, dirty cooling packs, track tension, and skipped fluid samples. Put the daily walkaround next to the hour-meter habit. Clean debris from the belly pan and radiator screen, look for shiny pins that are running dry, and write down track or tire issues before they become a jobsite delay. Attachments matter too. A machine running a mower, breaker, planer, or trencher often needs more frequent inspection because shock load and dust accelerate wear. Treat this schedule as the starting baseline, then shorten intervals for demolition, forestry, hot weather, and dusty grading.

Frequently asked questions

How often should you change engine oil on a Bobcat T86?

Typical Bobcat T86 service calls for changing engine oil every 500 operating hours (after the initial 50-hour break-in service), or sooner in dusty, hot, or heavy-load conditions.

When are filters and fluids due on the Bobcat T86?

Primary filter service is typically scheduled every 500 hours, with hydraulic fluid service around 1000 hours. Super-flow/forestry applications should shorten hydraulic filter and planetary drive oil checks to 250 hours.

What is included in the 50-hour break-in service on a Bobcat T86?

At the first 50 hours on a new or rebuilt Bobcat T86, inspect and replace break-in engine oil and filters (Plus hydraulic return/charge filters if specified in the operator's manual), verify wheel lug or track tension torque, check belt tension, and inspect all hoses and fittings for early leaks.

What is on the daily pre-start checklist for the Bobcat T86?

Inspect tracks, rollers, idlers, and super-flow auxiliary quick couplers before every shift. Grease loader linkage, 5-link torsion suspension (if equipped), and Bob-Tach pins every 10 hours. Log every hour-meter reading and service task in EquipHours.

How do I track Bobcat T86 maintenance hours automatically?

You can load the Bobcat T86 (500h oil / 500h filter intervals) directly into EquipHours for free (up to 2 machines free forever, no credit card required) to log engine hours in 10 seconds and get automatic overdue alerts.

Related skid steers schedules

Track these intervals automatically with EquipHours

Set hour or mile intervals once, let crews log service in the field, and see what is coming due before a missed PM becomes downtime.