TYM T474 200h oil ยท 200h filters ยท Free for 2 machines
Track this TYM T474 Free โ€” Auto-Load All Service Intervals

TYM T474 Maintenance Schedule (200h Chart)

Use this schedule as a field planning aid for the 48.3 hp Kukje A2300N4 4-cylinder diesel. Mechanical-injection 4-cylinder diesel: 50-hour break-in service, then 200-hour oil and 400-hour transmission fluid.

Pre-load this TYM T474 into your free maintenance log Auto-loads 200h oil & 200h filter alerts, filter part-number vault, and resale binder. Free forever for 2 machines โ€” no credit card required.

TYM T474 interval summary

Service itemTypical intervalField note
Engine oil200 hoursShorten for dusty, hot, idle-heavy, or severe-duty work.
Hydraulic fluid400 hoursWatch for contamination, overheating, slow functions, or leaks.
Filters200 hoursIncludes engine oil, fuel, air, hydraulic, or separator filters as equipped.
Grease pointsDaily to 50 hoursGrease TX47 loader boom/bucket pins every 10 hours; front axle, steering, and 3-point linkage every 50 hours
Tracks / tires / running gearEvery shiftCheck tire pressure, wheel lug bolts, front axle oil level, and cooling screens before every shift

Service milestone checklist (50h / 200h / 200h / 1,000h)

DoneHour milestoneWhat to inspect & service
โ˜Daily / Every 10 hoursWalkaround fluid check (engine oil, coolant, hydraulic sight glass), grease tx47 loader boom/bucket pins every 10 hours; front axle, steering, and 3-point linkage every 50 hours, and check tire pressure, wheel lug bolts, front axle oil level, and cooling screens before every shift
โ˜First 50 hours (Break-in)Initial break-in engine oil & filter service (and hydraulic charge/return filter where required), re-torque hardware/lugs, check belt & hose clamps.
โ˜Every 200 hoursEngine oil & oil filter change, inspect air cleaner element, drain fuel water separator, inspect battery terminals and cooling core.
โ˜Every 200 hoursPrimary fuel filter(s), engine air filters, hydraulic/hydrostatic filter service, and driveline/final-drive oil level check.
โ˜Every 400 hoursFull hydraulic fluid service (400h), suction strainer inspection, coolant flush check, and valve lash inspection.

Always verify capacities, fluids, filters, break-in service, and exact intervals against your operator's manual and warranty requirements.

Track your TYM T474 intervals automatically in EquipHours

Stop tracking 200-hour oil changes and 200-hour filter services on paper. Load this TYM T474 schedule into EquipHours for push + email overdue alerts, filter part-number vault, verified resale binder, and printable QR decals.

๐Ÿ”ง Repair shop or equipment dealer? Put your shop on cab stickers & earn recurring commission via Residual Apps โ†’

Compact Tractors maintenance tips

Compact tractors often do mixed work: loader work in the morning, mowing in the afternoon, and grading or snow work later in the season. That makes meter-based service more reliable than calendar memory. Grease loader pins frequently, check front axle oil where applicable, and keep radiator screens clean when mowing or brush work throws chaff into the grille. Tire pressure matters because ballast, loader loads, and slopes change handling quickly. Track engine oil, hydraulic filters, fuel filters, and mower deck or backhoe fittings as separate items so one attachment does not hide another service need.

Frequently asked questions

How often should you change engine oil on a TYM T474?

Typical TYM T474 service calls for changing engine oil every 200 operating hours (after the initial 50-hour break-in service), or sooner in dusty, hot, or heavy-load conditions.

When are filters and fluids due on the TYM T474?

Primary filter service is typically scheduled every 200 hours, with hydraulic fluid service around 400 hours. Mechanical-injection 4-cylinder diesel: 50-hour break-in service, then 200-hour oil and 400-hour transmission fluid.

What is included in the 50-hour break-in service on a TYM T474?

At the first 50 hours on a new or rebuilt TYM T474, inspect and replace break-in engine oil and filters (Plus hydraulic return/charge filters if specified in the operator's manual), verify wheel lug or track tension torque, check belt tension, and inspect all hoses and fittings for early leaks.

What is on the daily pre-start checklist for the TYM T474?

Check tire pressure, wheel lug bolts, front axle oil level, and cooling screens before every shift. Grease TX47 loader boom/bucket pins every 10 hours; front axle, steering, and 3-point linkage every 50 hours. Log every hour-meter reading and service task in EquipHours.

How do I track TYM T474 maintenance hours automatically?

You can load the TYM T474 (200h oil / 200h filter intervals) directly into EquipHours for free (up to 2 machines free forever, no credit card required) to log engine hours in 10 seconds and get automatic overdue alerts.

Related compact tractors schedules

Track these intervals automatically with EquipHours

Set hour or mile intervals once, let crews log service in the field, and see what is coming due before a missed PM becomes downtime.