TYM T25 Maintenance Schedule (200h Chart)
Use this schedule as a field planning aid for the 24.7 hp Yanmar 3TNV80F 3-cylinder diesel. Sub-compact/compact tractor: perform 50-hour break-in oil and hydraulic filter change, then every 200 hours.
TYM T25 interval summary
| Service item | Typical interval | Field note |
|---|---|---|
| Engine oil | 200 hours | Shorten for dusty, hot, idle-heavy, or severe-duty work. |
| Hydraulic fluid | 400 hours | Watch for contamination, overheating, slow functions, or leaks. |
| Filters | 200 hours | Includes engine oil, fuel, air, hydraulic, or separator filters as equipped. |
| Grease points | Daily to 50 hours | Grease TX25H loader pins, backhoe pivots, front axle trunnion, and 3-point hitch every 10โ50 hours |
| Tracks / tires / running gear | Every shift | Inspect tire pressure, wheel lug torque, and front axle oil level every 50 hours |
Service milestone checklist (50h / 200h / 200h / 1,000h)
| Done | Hour milestone | What to inspect & service |
|---|---|---|
| โ | Daily / Every 10 hours | Walkaround fluid check (engine oil, coolant, hydraulic sight glass), grease tx25h loader pins, backhoe pivots, front axle trunnion, and 3-point hitch every 10โ50 hours, and inspect tire pressure, wheel lug torque, and front axle oil level every 50 hours |
| โ | First 50 hours (Break-in) | Initial break-in engine oil & filter service (and hydraulic charge/return filter where required), re-torque hardware/lugs, check belt & hose clamps. |
| โ | Every 200 hours | Engine oil & oil filter change, inspect air cleaner element, drain fuel water separator, inspect battery terminals and cooling core. |
| โ | Every 200 hours | Primary fuel filter(s), engine air filters, hydraulic/hydrostatic filter service, and driveline/final-drive oil level check. |
| โ | Every 400 hours | Full hydraulic fluid service (400h), suction strainer inspection, coolant flush check, and valve lash inspection. |
Cab Service Sign-Off Log โ TYM T25
| Date | Engine Hours | Service Performed | Filter # / Fluid Added | Initials |
|---|---|---|---|---|
Always verify capacities, fluids, filters, break-in service, and exact intervals against your operator's manual and warranty requirements.
Stop tracking 200-hour oil changes and 200-hour filter services on paper. Load this TYM T25 schedule into EquipHours for push + email overdue alerts, filter part-number vault, verified resale binder, and printable QR decals.
๐ง Repair shop or equipment dealer? Put your shop on cab stickers & earn recurring commission via Residual Apps โ
Compact Tractors maintenance tips
Compact tractors often do mixed work: loader work in the morning, mowing in the afternoon, and grading or snow work later in the season. That makes meter-based service more reliable than calendar memory. Grease loader pins frequently, check front axle oil where applicable, and keep radiator screens clean when mowing or brush work throws chaff into the grille. Tire pressure matters because ballast, loader loads, and slopes change handling quickly. Track engine oil, hydraulic filters, fuel filters, and mower deck or backhoe fittings as separate items so one attachment does not hide another service need.
Frequently asked questions
Typical TYM T25 service calls for changing engine oil every 200 operating hours (after the initial 50-hour break-in service), or sooner in dusty, hot, or heavy-load conditions.
Primary filter service is typically scheduled every 200 hours, with hydraulic fluid service around 400 hours. Sub-compact/compact tractor: perform 50-hour break-in oil and hydraulic filter change, then every 200 hours.
At the first 50 hours on a new or rebuilt TYM T25, inspect and replace break-in engine oil and filters (Plus hydraulic return/charge filters if specified in the operator's manual), verify wheel lug or track tension torque, check belt tension, and inspect all hoses and fittings for early leaks.
Inspect tire pressure, wheel lug torque, and front axle oil level every 50 hours. Grease TX25H loader pins, backhoe pivots, front axle trunnion, and 3-point hitch every 10โ50 hours. Log every hour-meter reading and service task in EquipHours.
You can load the TYM T25 (200h oil / 200h filter intervals) directly into EquipHours for free (up to 2 machines free forever, no credit card required) to log engine hours in 10 seconds and get automatic overdue alerts.
Related compact tractors schedules
- TYM T474 maintenance schedule (200h oil / 200h filters)
- Yanmar SA325 maintenance schedule (200h oil / 200h filters)
- New Holland Workmaster 25S maintenance schedule (150h oil / 150h filters)
- Kubota L2501 maintenance schedule (200h oil / 200h filters)
- Kubota BX23S maintenance schedule (200h oil / 200h filters)
- John Deere 1025R maintenance schedule (200h oil / 200h filters)
Track these intervals automatically with EquipHours
Set hour or mile intervals once, let crews log service in the field, and see what is coming due before a missed PM becomes downtime.